Description:

Yale High Security Superior 1 Star Euro Profile Cylinder Thumbturn Lock Anti Snap Bump uPVC Door Barrel

The Yale Superior euro cylinder thumbturn offers British Kitemarked TS007:2014 1 Star security and has been tested to the British Standards BS EN1303:2005

Suitable for PVCu, wood and composite doors, this cylinder is Secured-By-Design approved and recommended for use on doors that require a high level of security.

Cylinder Specifications:

• Replacement 6 pin Euro Profile Cylinder
• Advanced pin tumbler technology
• Superior physical strength
• BSI Kitemark Approved with BS EN1303:2005 accreditation
• TS007 1 Star Cylinder
• Secured by Design approved
• High security level
• 10 year guarantee
• TS007:2014

TS007 is a standard developed in response to concerns over cylinder attacks. The standard is characterised by a 3 star rating system, and can be achieved by combining a 1 star cylinder wth a 2 star security door furniture solution.

Yale recommends using this 1 star cylinder in conjunction with a Platinum Series 2 star handle to achieve 3 star security for the best level of protection against cylinder manipulation attack.

Cylinder Features:

• Anti-Bump, Anti-Pick and Anti-Drill protection
• Available in Polished Brass and Nickel Plated finish
• 3 Keys supplied per cylinder (Extra available)

What's Included in Pack?

• 1 x Yale Superior Series Euro Profile Cylinder Lock
• 1 x Key Card
• 3 x Laser cut dimple keys as standard (Extra keys available please see the drop down above)
• 1 x Fixing Screw

Need Extra Keys?

These cylinders are supplied with 3 keys as standard. However, if more keys are required, please add your cylinder(s) your basket and use our Extra Key Cutting service to add more keys to your order.

Don't know what size cylinder you need? 

Please measure from one side of the cylinder lock (A) to centre fixing screw hole e.g 35mm. Simply do the same measurement with other side (B) 45mm. The cylinder is this case would be 35/45.

How do I fit a new door cylinder?

These easy to fit replacement Yale cylinders enhance the security of your door and can be fitted by a DIY novice in minutes!

1. Open the door and unscrew the one fixing screw which is located on the lock faceplate (the strip of metal the full length of your door), in line with the bottom of the door cylinder.
2. Put the key into one side whilst holding the other side firm.
3. Turn the key and the cylinder should slide out, if it does not turn the key in the opposite direction and the cylinder should slide out.
4. Take your new cylinder lock and insert the new key and turn it until the cam is inline with the body of the cylinder. Insert the new cylinder into position and replace the fixing screw.
5. If the door cylinder is offset (i.e. 40/60, 30/50 etc) ensure the off set is protruding from the correct side. Check the operation of the lock before you close the door.